Electrical & Instrument – SIERRA

Innovaswitch

Innovaswitch

FLOW / LEVEL SWITCH INNOVASWITCH

Models

  • 615

Description

  • Ultra sensitive with fast response time
  • Switches on a flow/no flow condition
  • Ideal for industrial pump protection
  • Unique high temperature to 850°F (454°C)
  • 2-year workmanship warranty

Fluids Measured

  • Gases and liquids

Accuracy

  • Range of 0.01 to 5 sfps (0.003 to 524 smps) in liquids and 0.1 to 500 sfps (0.03 to 152.4 smps) gases

Repeatability

  • +/- 1% of set point (Flow) or 1/32″ (0.8mm) Level

Stability

  • Drift <0.5% from calibrated set point over a range of +/-50°F

Operating Temperature Range

  • Standard -100°F to 390°F (-73.3°C to 200°C)
  • Medium Temperature to 572°F (300°C)
  • High Temperature to 850°F (454°C)
Find Out More

Specialty MFCS

Specialty MFCS

DIGITAL / SPECIALTY MFCS

Models

  • MicroTrak 101 Ultra Low Flow
  • SmartTrak 140 Ultra Low Delta P
  • SmartTrak 100-HP Ultra High Pressure
  • MaxTrak 180 Industrial NEMA 6 (IP67)

Description

  • Digital MFC’s engineered for challenging applications
  • Ultra-low flow rates down to 0.1 sccm (smlm)
  • Ultra-low pressure drop ΔP of 5 psid (310 mBard)
  • Industrial approval ratings of NEMA 6 & IP67 ratings
  • High pressure up to 5000 psig (345 barg)
  • Many other versions available, consult factory
  • Leak integrity 5 x 10-9 smL/sec of helium
  • Free user software
  • CE Approved

Fluids Measured

  • All clean gases including toxics and corrosives

Accuracy

  • +/- 1.0% of full scale

Repeatability

  • +/- 0.2% of full scale

Flow Range

(Turndown – Meters 100:1 / Controllers 50:1)

  • Mass flow rates up to 1000 slpm (nlpm); higher upon request
  • Low flow ranges under 4 sccm (smlm), with a minimum controllable mass flow rate of 0.1 sccm (smlm)

Digital Communications

(may vary based on version)

  • Foundation Fieldbus, Modbus RTU, and Profibus DP
Find Out More

Smarttrak 100

Smarttrak 100

DIGITAL / SMARTTRAK 100

Models

  • 100L Low Flow
  • 100M Medium Flow
  • 100H High Flow

Description

  • Highest performance multi-gas MFC
  • Flagship mass flow meter & controller
  • Navigate easily with large multifunction display interface
  • Free user software
  • Primary Standard calibration & NIST traceability
  • Make adjustments in the field
  • Configure up to 10 gasses
  • Proprietary frictionless-hovering, direct- acting control/shut-off valve
  • User-friendly pilot module display interface is front-mounted, hand-held, or remote mounted
  • Leak integrity 5 x 10-9 smL/sec of helium
  • CE Approved

Fluids Measured

  • All clean gases including toxics and corrosives
  • Dial-A-Gas allows you to change between 10 gases with one unit

Accuracy

  • +/- 1.0% of full scale
  • +/- 0.5% of full scale available

Repeatability

  • +/- 0.2% of full scale

Digital Communications

  • Foundation Fieldbus, Modbus RTU, and Profibus DP

Flow Range

(Turndown – Meters 100:1 / Controllers 50:1)

100l low flow

  • 0 to 10 sccm (smlm) to 0 to 50 slpm (nlpm)

100M Medium flow

  • 0 to 300 slpm (nlpm)

100H High flow

  • 0 to 1000 slpm (nlpm)

Higher & lower flows available upon request

Find Out More

Smarttrak 50

Smarttrak 50

DIGITAL / SMARTTRAK 50

Models

  • 50L Low Flow
  • 50M Medium Flow

Description

  • Economical digital mass flow meter and controler
  • Powerful digital high-performance at OEM pricing
  • Save money with volume discounts
  • Navigate easily with large display
  • Free user software
  • Choice of aluminum or 316 stainless steel construction
  • Compact size makes drop-in replacement easy
  • Local display and digital setpoint
  • Optional analog setpoint/output signals
  • Field adjustable zero and span
  • Primary Standard calibration & NIST traceability
  • Leak integrity 1 x 109 smL/sec of helium
  • CE Approved

Fluids Measured

  • All clean gases including toxics and corrosives

Accuracy

  • +/- 1.0% of full scale

Repeatability

  • +/- 0.25% of full scale

Digital Communications

  • RS-232, RS-485 (Multi-drop)

Flow Range

(Turndown – Meters 100:1 / Controllers 50:1)

50l low flow

  • 0 to 10 sccm (smlm) to 0 to 50 slpm (nlpm)

50M Medium flow

  • 0 to 200 slpm (nlpm)

Higher & lower flows available upon request

Find Out More

Boilertrak

Boilertrak

THERMAL MASS BOILERTRAK & FASTFLO

Models

  • BoilerTrak 620S-BT Insertion probe
  • FastFlo 620S Insertion probe

Description

  • Increase efficiency with fast response time within 200 milliseconds
  • No moving parts, low pressure drop, high turndown 100:1
  • BoilerTrak optimized for methane, propane and natural gas
  • FastFlo optimized for air, nitrogen, and inert gas measurement
  • Free user software
  • Validate in the field for easy in-situ calibration
  • Certified for GHG measurement meeting EPA (40 CFR Part 98)
  • Easily install in the field or retrofit

Flow Range (100:1 Turndown)

  • Wide flow range from 0 to 20,000 sfpm (100 mps)

Accuracy

  • +/- 1% of full scale

Repeatability

  • +/- 0.2% of full scale

Digital Communications

  • Modbus RTU

Fluids Measured

Fastflo 620S

  • Measure all inert gases and all non- condensing clean gases

BoilerTrak 620S-bT

  • Flammable gases: methane, propane, natural gas

Hazardous Area Approvals

  • CE, GOST R, Chinese Pattern
Find Out More

Toptrak

Toptrak

ECONOMICAL MFC / TOPTRAK

Models

  • 820 Nylon
  • 820S Stainless Steel
  • 826 Aluminum

Description

  • Proven flow measurement with affordable OEM pricing
  • Choice of nylon, aluminum or stainless- steel construction
  • Save money with volume discounts
  • Large, tiltable display readout
  • Compact size makes drop-in replacement easy
  • Precision measurement with low pressure drop
  • CE Approved

Fluids Measured

  • All clean gases; check compatibility with wetted materials
Accuracy

  • +/- 1.5% of full scale

Repeatability

  • +/- 0.5% of full scale

Flow Ranges (100:1 Turndown)

820 nylon

  • 0 to 50 slpm (nlpm)

820 aluminum

  • 0 to 175 slpm (nlpm)

820S Stainless Steel

  • 0 to 500 slpm (nlpm)

Higher flows available upon request

Find Out More

Caltrak

Caltrak

GAS FLOW CALIBRATORS CALTRAK

Models

  • 500, 800 Premium
  • XL High Flow

Description

  • Quick, easy to use, automatic data capture using free software
  • Portable and battery operated
  • Results directly traceable to NIST
  • Highest accuracy primary standard for labs & industry (compare at ± 0.15% of reading)
  • Innovative – 100:1 turndown ratio
  • Proven dimensionally-based primary standard accuracy backed by a rigorous uncertainty analysis
  • Manufactured to ISO 17025 Standards at a NVLAP accredited lab

Fluids Measured

  • All clean gases; toxic and corrosive gas versions available
Accuracy

  • Highest accuracy of ± 0.15% of reading gas mass flow rate

note: At gas pressure of 760 mmHg, (1 atm) and a gas temperature of 25°C (77°F) with standardization temperature set to 21.1 °C (69.98°F)

Flow Ranges

  • 500 Premium

5 sccm to 50 slpm (Across three flow cells)

  • 800 Premium

0.5 sccm to 100 slpm (Across five flow cells)

  • XL High Flow

5 slpm to 1500 slpm

Find Out More

Sidetrak

Sidetrak

ECONOMICAL MFC / SIDETRAK

Models

  • 840L Low Flow
  • 840M Medium Flow
  • 840H High Flow

Description

  • Dependable analog mass flow control for over 30 years
  • Cleanable sensor tube for dirty gases
  • Precision control with low pressure drop
  • Count on durability with rugged construction
  • Available in wide variety of enclosures, process connections, input/output options and control electronics
  • Leak integrity 1 x 109 smL/sec of helium
  • CE Approved

Fluids Measured

  • All clean gases including toxics, corrosives and combustibles
Accuracy

  • +/- 1.0% of full scale

Repeatability

  • +/- 0.5% of full scale

Flow Ranges (50:1 Turndown)

840l low flow

  • 0 to 15 slpm (nlpm)

840M Medium flow

  • 0 to 100 slpm (nlpm)

840H High flow

  • 0 to 500 slpm (nlpm)

Higher flows available upon request

Find Out More

Flobox

Flobox

DIGITAL CONTROL FLOBOX

Descriptions

  • Feature packed digital performance for analog MFC’s
  • Large digital display with pushbuttons
  • Power one to four units
  • Master-slave ratio control
  • Independent totalizers and alarms
Features

  • Power input: 100, 110 or 240 VAC (specify when ordering), 50/60 Hz
  • Power output: +/- 15 VDC, 250-500 mA
  • Signal input from device: User selectable: 0-5 & 0-10 VDC, 4-20 mA
  • Analog output: Set point and output user selectable 0-5 & 0-10 VDC, 4-20 mA (250 ohm max load resistance)
  • 2 alarms per channel
  • Digital output: RS-232, RS-485

Programmable Functions

(Model 954 four independent channels):

  • Valve override: Run, Close, Purge
  • Display flow or totalizer
  • Engineering units
  • Gas name/symbol
  • A/D filter rate
  • Input signal type
  • Alarm high and low values
  • Master-slave ratio control
  • Calibrate full scale
  • Calibrate zero
  • Gas correction factor
Find Out More

Smartvo Valve

Smartvo Valve

CONTROL VALVES / SMARTVO

 

Models

  • VO-100L Low Flow
  • VO-100M Medium Flow
  • VO-100H High Flow
  • VO-100HP High Pressure
  • VO-101 Ultra Low Flow

Descriptions

  • Fast-response control valve
  • Proprietary frictionless-hovering direct-acting control valve
  • Operate over a wide pressure differential range
  • Many choices of fitting and elastomers
  • Valve designed with positive shut off
  • Aluminum and 316L stainless steel construction
  • Single sided 10-30 VDC input power reduces installation cost and complexity
  • Leak integrity 5 x 10-9 smL/sec of helium
  • CE Approved

Fluids Measured

  • All clean gases including toxics and corrosives

Control Range

  • 0 to 100%, control signal dependent

Flow Ranges

  • 0 to 10 sccm to 0 to 1000 slpm
  • Ultra-low flow rates down to 0.1 sccm (smlm)
  • High pressure up to 5000 psig (345 barg)
Find Out More

Steelstrak / Steelmas

Steelstrak / Steelmas

MODeLs

  • SteelMass 640S Insertion probe
  • MultiTrak 670S Multi-point insertion
  • SteelTrak 780S Inline
  • SteelTrak 780S Inline Ultra High Purity

Descriptions

  • Insertion, Inline and multi point configurations
  • Patented no-drift DrySenseTM sensor, lifetime warranty
  • No moving parts, low pressure drop, high turndown 100:1
  • Insertion and inline, totalizing gas mass flow
  • Inline version built-in flow conditioning for only 3-diameters up, zero downstream
  • Free user software
  • Validate in field for in-situ calibration
  • Economical NEMA 4X enclosure available
  • High temperature to 800°F (430°C) available
  • Axial and purge designs for dirty gases
  • Certified for GHG measurement meeting EPA (40 CFR Part 98)
  • Hazardous-area location approvals

Fluids Measured

  • All inert gases and all non-condensing clean gases
  • Flammable gases
Flow Range (100:1 Turndown)

  • Wide flow range from 0 to 20,000 sfpm (100 smps)

Accuracy

  • +/- 1.0% of reading plus +/-0.5% of full scale

Repeatability

  • +/- 0.2% of full scale

Digital Communications

  • Foundation Fieldbus, HART, Modbus RTU, and Profibus DP

Hazardous Area Approvals

  • FM, CSA, CRN, ATEX, PED, GOST R, Chinese Pattern, CE
Find Out More

Flowtrak

Flowtrak

Description

  • Creates uniform flow profile to maximize accuracy in constrained piping areas
  • Reduce upstream piping diameters to less than 3 diameters
  • Use upstream of any gas flow meter
  • Proven Dual-Plate inline flow conditioning technology
  • Creates uniform flow profile at an economical price
  • Low pressure drop
  • May be used in very large diameter pipes
  • Designed for use with ANY point velocity

Fluids Measured

  • Gas metering applications
Straight Length ImprovementDiameters relative to flow profile disturbance in brackets ( )

  • One 90° Elbow: FlowTrak (1); Orifice plate (28)
  • Two 90° Elbows Same Plane: FlowTrak (3); Orifice plate (36)
  • Two 90° Elbows Different Planes: FlowTrak (5); Orifice plate (62)
  • Reducer – 4/1: FlowTrak (3); Orifice plate (14)
  • Globe Valve – Fully Open: FlowTrak (2); Orifice plate (32)
Find Out More

Quadratherm

Quadratherm

THERMAL MASS / QUADRATHERM

Models

  • 640i Insertion Probe
  • 780i Inline

Descriptions

  • Highest accuracy thermal meter in the world
  • Multivariable outputs: Mass flow rate, temperature, pressure
  • Patented “QuadraTherm” 4-Sensor thermal technology
  • Patented no-drift DrySenseTM sensor, lifetime warranty
  • Inline version has built-in flow conditioning
  • No moving parts, low pressure drop, high 100:1 turndown
  • Free user software
  • Change gas in the field
  • Change pipe size in field (insertion version)
  • Validate in field for in-situ calibration
  • Certified for GHG measurement meeting EPA (40 CFR Part 98)
  • Hazardous-area location approvals

Fluids Measured

  • Measure all inert gases and all non- condensing clean gases
  • Flammable gases
Flow Range (100:1 Turndown)

  • Very low flows and high flows up to 60,000 scfm (305 smps)

Acccuracy

780i inline

  • +/- 0.5% of reading above 50% of full scale

640i insertion

  • +/- 0.75% of reading above 50% of full scale

*Verified by an independent NIST & NVLAP accredited lab

Repeatability

  • +/- 0.15% of full scale

Digital Communications

  • Foundation Fieldbus, HART, Modbus RTU, and Profibus DP

Hazardous Area Approvals

  • cFMus, ATEX, IECEx, PED, GOST R, Chinese Pattern, CE
Find Out More

Innovasonic

Innovasonic

ULTRASONIC / INNOVASONIC

Models

  • 203 Fixed installation economical
  • 207i Thermal Energy/BTU
  • 210 Portable

Description

  • Transit-time ultrasonic
  • Clamp-on outside of pipe for easy set up
  • Thermal energy/BTU measurement
  • Proprietary Raptor II Flow Engine
  • Real time density, flow profile adjustment
  • Real time heat capacity adjustment
  • Fixed installation and portable versions
  • High accuracy at low and high flows

Fluids Measured

  • Water and liquids; Tolerant of liquids with small amounts of air bubbles or suspended solids
Flow Range (30:1 Turndown)

  • Bi-directional flow range of 0.16 ft/s to 40 ft/s (0.05 to 12 m/s) version dependent
  • Pipe sizes from 2 to 236 inches (50 to 6000 mm) version dependent

Digital Communications

  • RS-232, RS-485, USB, Modbus RTU
  • Pending (207i): BACnet

Accuracy & Repeatability

203 economical

  • Accuracy: +/- 0% of reading
  • Repeatability: +/- 3% of reading 207i

fixed installation

  • Accuracy: +/- 5% of reading from 0.16 to 40 ft/s (0.05 to 12 m/s)
  • Repeatability: +/- 0.15% of reading >0.16 ft/s (0.05 m/s)

210 Portable

  • Accuracy: +/- 5% of reading
  • Repeatability: +/- 3% of reading
Find Out More

Innovamas

Innovamas

Vortex / Innovamas

Models

  • 240i Inline
  • 241i Insertion

Description

  • Completely redesigned “i-Series”
  • 5-in-1: Mass & volumetric flow rate temperature, pressure, density
  • Raptor II OS for best performance
  • New Applications: FloProTM, qMixTM, Dial-A-PipeTM, Dial-A-FluidTM, ValidCalTM
  • Field firmware upgrade capability
  • Thermal energy / BTU measurement

Fluids Measured

  • Steam, Gases, and Liquids
Flow Range

  • Liquids: 1.0 ft/s (0.3 m/s) Velocity Min. 30 ft/s (9.14 m/s) Velocity Max.
  • Gas and Steam

  • Digital Communications
  • HART, Modbus, Profibus DP, Foundation Fieldbus, BACnet, USB, RS-232

Hazardous Area Approvals

  • CE, cFMus, ATEX, PED, IECEx
Find Out More